Difference between revisions of "ATV500X"

From MyGica
Jump to: navigation, search
(Remotes)
 
(One intermediate revision by the same user not shown)
Line 10: Line 10:
 
  '''Resolution: ''' 1280*720
 
  '''Resolution: ''' 1280*720
 
  Built in 802.11 b/g/n WiFi
 
  Built in 802.11 b/g/n WiFi
 +
 +
 +
== History ==
 +
 +
Mygica's Very First XBMC Linux Based Box, only works with Pure Linux based XBMC
 +
 +
  
 
== Firmware & Re-flashing ==
 
== Firmware & Re-flashing ==
Line 81: Line 88:
 
<youtube>7lSDk7Dnyjk</youtube>
 
<youtube>7lSDk7Dnyjk</youtube>
  
[[File:BackSide.png]]
+
<!-- Master Reset Start here -->
  
<!-- Master Reset Start here -->
 
 
== Master Reset ==
 
== Master Reset ==
  

Latest revision as of 17:00, 29 June 2015

Atv500X.png
CPU:        ARM Cortex A9
OS:          Linux KODI 14
Frequency:   800MHZ
RAM:         DDR3-512MB
Storage:     NAND 2GB
External NTFS HDD Compatible
Resolution:  1280*720
Built in 802.11 b/g/n WiFi


History

Mygica's Very First XBMC Linux Based Box, only works with Pure Linux based XBMC


Firmware & Re-flashing

The Firmware that is available for this box is,

This must be loaded using an SD Card or USB Storage Device through the Recovery Screen. Which can be accessed by using the Reset button on the bottom of the unit.

[Click here]

Remotes

Kr34.jpg

to learn KR34 Remote click on the picture

User Manual

we will be adding the file manual soon,


Connections
Right side:
1. MiniSD Card Slot
2. 2 USB 2.0 Ports

RightSide.png

Back Side
1. 2 USB 2.0 Ports
2. HDMI 1.3 Connection
3. Power Connection 5V
4. Power Button 

BackSide.png


how to connect to Wifi

1. Scroll to System & Select Settings

500X01.png

2. Select System

500X02.png

3. Scroll Down to Internet Access then scroll to the Right Select Network Connection

500X03.png

4. Select your WiFi and Click on it

500X04.png

5. Enter your Password and click Done

500X05.png

6. You See your Wifi Name your connected too also IP Address assigned for your Box

500X06.png


XBMC shrank, or not full-size display

We have Video Walk through for this too


Master Reset

1. Unhook the power 2. Using a toothpick place at the back of unit for reset & then hookup the power 3. hold the toothpick for 8 to 10 seconds

You will see this screen, the Scroll down and select "Wipe Data/Factory Reset"

MR-01.png

Then Next Screen Select "Delete all user data"

MR-02.png

The Unit will reboot..

Here is Video Instruction how to process